Jonsbo D32 PRO White

The Jonsbo D32 PRO is a compact Mini-Tower case designed for Mini-ITX and Micro-ATX motherboards. Without feet and protruding elements, it measures 384 mm in length, 207 mm in width, and 302 mm in height. When these elements are included, the dimensions increase to 396 mm, 207 mm, and 314 mm respectively. The case is constructed from SPCC steel with thicknesses of 0.7 mm and 0.8 mm, ensuring a robust structure. The interior accommodates up to four 2.5-inch drives or two 3.5-inch drives depending on your system configuration. The front panel features two USB 3.2 Gen1 Type-A ports, one USB 3.2 Gen2 Type-C port, and connectors for headphones and microphone. For cooling, you can install two 120-mm or two 140-mm fans on top, one 120-mm fan at the rear, and up to three 120-mm or two 140-mm fans at the bottom, depending on other system components. It also supports a 240-mm liquid cooling radiator on the top panel. The maximum graphics card length supported is 365 mm, allowing for high-end modern graphics adapters. Power supply length restrictions depend on GPU placement: when installed in the first PCI-E slot, the PSU length should not exceed 150 mm (recommended up to 140 mm); when placed in the second slot, up to 170 mm (recommended up to 160 mm). With a graphics card up to 288 mm long and the power compartment partition removed, power supplies up to 200 mm can be installed, though 16A plugs are incompatible in this configuration. The case supports both SFX and SFX-L format power supplies. CPU cooler height is limited to 170 mm for Intel and 169 mm for AMD in Mode A; in Mode B, these limits are 164 mm and 163 mm respectively. The D32 PRO features four expansion slots and supports Back-Connect mode for compatible Micro-ATX motherboards, optimizing cable management and improving internal airflow. With a weight of 4.6 kg, it remains light and easy to transport. The side panel is made from tempered glass, showcasing internal components and giving your system an aesthetic appearance.