Micron 7500 PRO 960 GB (MTFDKCC960TGP-1BK1DABYYR)

The Micron 7500 PRO is a data center NVMe SSD series in the U.3 form factor (2.5 inches, 15 mm thick) with PCI Express Gen4 x4 interface and backward compatibility with U.2, designed for servers and hot-swap systems. The series supports NVMe 2.0b and NVMe-MI 1.2b, up to 128 namespaces, sector size configuration of 512 or 4096 bytes, SMART, and firmware updates with activate-without-reset capability. It meets OCP 2.0 Datacenter NVMe compatibility standards and provides TCG Opal 2.01 security and digitally signed firmware. Available capacities range from 960 GB to 15,360 GB, allowing selection of drives to match various storage density and workload profiles. Sequential read performance at 128 KB reaches 6800–7000 MB/s in steady state, while sequential write speeds scale with capacity from 1400 MB/s at 960 GB to 5900 MB/s at 7680–15,360 GB. Random read performance delivers 800K–1.1M IOPS at 4 KB, random write achieves 85K–250K IOPS at 4 KB, and mixed 70/30 read/write workloads reach up to 530K IOPS. Typical latency for 4 KB QD1 is approximately 70 microseconds for reads and 15 microseconds for writes, with 99th percentile latencies of 80/65 microseconds. Durability is rated at 1 DWPD with TBW scaling from 1752 TB at 960 GB to 28,032 TB at 15,360 GB. Power supply requirements are 12 V ±10% and 3.3 V AUX ±10%; power consumption in idle mode is approximately 5 W, up to 12.3–15.5 W during reads, and up to 7.3–18.3 W during writes. Operating temperature range is 0–70 °C, with physical dimensions of 100.45×70.10×15.00 mm.